Sanyo Xacti VPC-CG100EX Instruction Manual page 191

Exposure control
type
Light-measuring
mode
Range
Digital zoom
Shutter speed
Sensitivity
Minimum subject
illumination
Image stabilizer
Monitor
Programmable AE/Shutter speed priority AE/
Aperture priority AE/Manual exposure control
Exposure compensation available (0 ±1.8 EV in
0.3 EV steps)
Multi-section measuring, center-weighted
measuring, spot measuring
Normal mode:
50 cm (19.69 in.) to infinity
Super macro mode:
1 cm (0.39 in.) to 80 cm (31.50 in.) (wide end only)
For shooting:
1× to approx. 10×
For playback:
1× to approx. 72.5× (varies with resolution)
Still image shooting mode: 1/2 to 1/1,500 sec.
(Approx. 1 sec. max. when scene select function
is set to lamp Q)
(During flash: 1/30 to 1/1,500 sec.)
Sequential shots mode: 1/30 to 1/1,500 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max. when scene select function is set
to lamp Q or the high sensitivity mode)
Still image shooting (standard output sensitivity*)/
video clip recording mode:
Auto (video clip recording: ISO 50 to 800; still
image shooting: ISO 50 to 400)/ISO 50, ISO 100,
ISO 200, ISO 400, ISO 800, and ISO 1600
(switchable from the Recording Menu)
h Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
h Maximum ISO sensitivity up to 1600 equivalent
when Scene Select function is set to Q.
17 lux (1/30 sec. in the scene select AUTO mode)
5 lux (1/15 sec. in the HIGH SENSITIVITY or lamp
mode)
Video: Electronic
Still image: Multi-calculation electronic
2.7" (6.9 cm) low-temperature polysilicon TFT color
wide liquid crystal (transmissive), approx.
230,000 pixels
182
English