Tv Output Setting - Sanyo Xacti VPC-CG100EX Instruction Manual

TV output setting

Specify the type of image signal that is output from your camera's USB/AV
terminal.
1
Select "TV OUTPUT", and press
the SET button.
TV SYSTEM:
Set the type of TV signal that is
output from the USB/AV terminal.
TV TYPE:
Set the TV's aspect ratio.
HDMI:
Set the signal that is output from
the HDMI terminal.
HDMI-CEC:
Set the HDMI-CEC function.
2
Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
<If "TV SYSTEM" is selected>
NTSC: Outputs NTSC video signals.
PAL: Outputs PAL video signals.
<If "TV TYPE" is selected>
16:9: Use this setting when a TV having an aspect ratio of 16:9 is
connected.
4:3: Use this setting when a TV having an aspect ratio of 4:3 is
connected.
<If "HDMI" is selected>
AUTO: The camera automatically determines the appropriate setting.
Choose this setting if the video clip was recorded in the &
720p:
or " mode.
1080i: Choose this setting if the video clip was recorded in the !
or Y mode.
Choose this setting if the video clip was recorded in the )
480p:
mode.
h Does not work with 480i connector.
TV OUTPUT
TV SYSTEM
TV TYPE
HDMI
HDMI-CEC
OK
English
NTSC
16:9
1080i
OFF
130