File No. Continued Setting - Sanyo Xacti VPC-CG100EX Instruction Manual

File No. continued setting

If a newly formatted card is used, the file name (image number) of the
captured image automatically begins from 0001. If the card is subsequently
reformatted, or if a different reformatted card is used, the file names again
begin from 0001. This is because the file number continued function is set to
"OFF", and consequently it results in more than one card containing images
with the same numbers, or may result in unintentionally overwriting files
when, for example, saving files in a computer. By setting the file number
continued function to "ON", even if the card is reformatted or the card is
replaced with another card, the consecutive numbering of file names
continues from the last number recorded by the camera.
<File number continued function "OFF">
File name (image number)
Card A 0001, 0002...... 0012, 0013
Card B 0001, 0002...... 0012, 0013
<File number continued function "ON">
File name (image number)
Card A 0001, 0002...... 0012, 0013
Card B 0014, 0015........0025, 0026
Replace card
Replace card
134
English