Important Mains Plug Wiring Instructions - ALLEN & HEATH MixWizard WZ20S User Manual

Important Mains plug wiring instructions.

The console is supplied with a moulded mains plug fitted to the ac
mains power lead. Follow the instructions below if the mains plug has
to be replaced.
The wires in the mains lead are coloured in accordance with the
following code:
TERMINAL
L LIVE
NEUTRAL
N
EARTH GND
E
If the colours of the wires in the mains lead do not correspond with the
coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Green and Yellow must be connected to
the terminal in the plug which is marked with the letter E or with the
Earth symbol.
The wire which is coloured Blue must be connected to the terminal in
the plug which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in
the plug which is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of
the plug being changed.
WARNING: This appliance must be earthed.
Mains electricity is dangerous and can kill. Mains voltage is
present within the console. Do not remove the covers with mains
electricity connected. Mains earth is connected to the console
chassis through the power lead to ensure your safety. Do not
remove this mains earth connection.
Any changes or modifications to the console not approved by Allen &
Heath could void the compliance of the console and therefore the
users authority to operate it.
4
European
BROWN
BLUE
GREEN & YELLOW
This product complies with the European Electromagnetic
Compatibility directives 89/336/EEC & 92/31/EEC and the
European Low Voltage Directives 73/23/EEC & 93/68/EEC.
WIRE COLOUR
USA/Canada
BLACK
WHITE
GREEN
WZ20S User Guide