Table of Contents
Advertisement
3.
THE FIREPLACE
3.1
INTRODUCTION
The BIS ULTIMA fireplace is an energy efficient, heat circulating, close combustion
fireplace. You will receive a lifetime of comfort and enjoyment from your fireplace
provided it is installed, maintained and operated properly.
• Please read these instructions and retain this manual for future reference.
• Before beginning the fireplace installation, consult the local authorities to obtain your
building permit and check your local building codes. Install the fireplace only as
described in these instructions and using only Security Chimneys International
components.
• The BIS ULTIMA is not intended for use with a gas log. Failure to follow these
instructions will void the certification and the warranty of the fireplace and may result in
an unsafe installation.
3.1.1 Parts Required
• Fireplace model BIS ULTIMA
• 6" diameter chimney model ASHT+,
manufactured by Security Chimneys International only, including:
- Chimney lengths
- Elbows (where necessary)
- Associated components as per these installation instructions
3.1.2 Additional Equipment (optional)
5" flexible venting system (central forced air kit)
•
Gravity venting system
•
Outside air kit
•
Panel for clean face option (only with gravity venting system)
•
Rigid firescreen
•
Fireplace fan kit
•
S-2100+,
HT6000+,
3
HT6103+
or
AC
Advertisement
Table of Contents
