Adjusting The Picture - IBM Computer Monitor User Manual

ADJUSTING THE PICTURE

OSD functions
OSD icon Description
Adjusts brightness
Brightness
Adjusts contrast
Contrast
This image lock function is used
to adjust the level of noise in the
video signal, which causes
horizontal lines or areas on the
screen where the image appears
to be unstable and jitters or
IMAGE LOCK
shimmers. This can be done
automatically or manually.
Use the Arrow buttons to adjust
away the interference. If
satisfactory results are not
obtained by using the Fine
adjustment first, then use the
COARSE adjustment and finally
use FINE adjustment again.
IMAGE LOCK
These actions may change the
(Continued)
width of the display image. Use
the H-Position function on the
image position menu to center
the display image on the screen.
Moves the screen left and right or
up and down.
IMAGE
POSITION
Sub- Controls and
menu(s) Adjustments
Automatic Automatic adjustment
Manual
˙Fine
˙Coarse
H-position
V-position
5