Factory Preset Timing Table - IBM Computer Monitor User Manual

FACTORY PRESET TIMING TABLE

DISPLAY MODES
The display mode the monitor uses is controlled by the computer. Therefore,
you should refer to your computer documentation for details in how to change
display modes.
The image size, position and shape may change when the display mode
changes. This is normal and the image can be readjusted using the monitor
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker,
TFT technology is inherently flicker-free. If possible, configure your computer
for 1024 X 768 addressability at 60Hz vertical refresh rate.
For the display modes listed below, the screen image has been optimized
during manufacture.
Factory Set Display Modes
ADDRESSABILITY
640 × 350
640 × 480
640 × 480
640 × 480
640 × 480
720 × 400
800 × 600
800 × 600
800 × 600
800 × 600
832 × 624
1024 × 768+
1024 × 768
1024 × 768
+ Recommended
REFRESH RATE
70Hz
60Hz
72Hz
75Hz
67Hz
70Hz
75Hz
72Hz
60Hz
56Hz
75Hz
60Hz
70Hz
75Hz
15
HORIZONTAL
FREQUENCY
31.5kHz
31.5kHz
37.9kHz
37.5kHz
35.0kHz
31.5kHz
46.9kHz
48.1kHz
37.9kHz
35.2kHz
49.7kHz
48.4kHz
56.5kHz
60.0kHz