Table of Contents
Advertisement
Power Indicator :
•
Green — Power On mode.
Orange — Off mode
.
How to adjust a setting
The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows.
Note:
If adjustment or selection of any OSD menu is not made for more than 10 seconds,
the current setup will be saved and the OSD will disappear automatically.
ADJUSTING THE PICTURE
1
CONTRAST
2
BRIGHTNESS
3
H-CENTER
4
H-SIZE
5
V-CENTER
6
V-SIZE
7
ZOOM
8
PINCUSHION
9
TRAPEZOID
10
PIN-BALANCE
11
PARALLELOGRAM
12
ROTATION
Figure 4 The OSD Message
Adjust the picture contrast.
Adjust the picture brightness.
Adjust the horizontal position of the picture.
Adjust the picture's horizontal size.
Adjust the vertical position of the picture.
Adjust the picture's vertical size.
Adjust the picture's horizontal and vertical size
simultaneously.
Adjust the pincushion and barrel
Adjust the picture's trapezoid distortion.
Adjust to compensate the pincushion unbalance.
Adjust the picture to be a rectangle.
Adjust the picture tilt to horizontal position.
Advertisement
Table of Contents
