Selecting The Mode Of The Remote; Selecting The Command Mode - Sony STR-DE585 Operating Instructions Manual

Remote Operations Function
Button
ENTER/ VCR/Satellite Enters the selection.
EXEC ktnerl
DVD player
EXIT/ VCR/Satellite Returns to the previous
RETURN tuner/ menu or exits the menu.
DVD player
4 Tape deck Starts play on the reverse
side.
ANT VCR Selects output signal
TV/ VTR from aerial terminal: TV
signal or VCR program.
DISC CD player/ Selects discs (multi-disc
VCD player changer only).
8-h VCD player Press to go back to the
previous menu.
TV/
TV/VCR Selects input stgnal: TV
VIDEO
input or video Input.
-I-- TV/VCR
Selects the channel
entry mode, either one
or two digit.
SEARCH DVD player Selectr searching mode.
MODE
Remote
Operations Function
Button
MUTING TV
Mutes the sound from
(wtth TV.
PAUSE)
PIN P'; TV Activates the picture-in-
picture function.
USE Remote Use to program the
MODE
remote.
AV I
Remote Select the mode of the
remote.
AV2
3RD
2ND ROOM
SOURCE Remote
Select 2ND AV output.
*' Only for Sony TVs with the picture-in-picture
function.
Notes
l
Some functtons explained in this section may not
work depending on the model of the receiver.
* The above explanation is intended to serve as an
example only.
CLEAR DVD player Press if you made a
Therefore, depending on the component the above
mistake when you press
operation may not be possible or may operate
the number button.
differently than described.
MONITOR TV
WIDE TV
Press to activate TV
control buttons. Press
again to restore original
categot-y.
Selects the wide picture
mode.
* The VIDEO 3, TV/SAT, AUX, PHONO, AUDIO
SPLIT. NIGHT MODE, EQITONE, ON SCREEN,
/IO, /ll, /12,3RD, 2ND ROOM and SOURCE
functions are not available for set operation.
JUMP TV Toggles between the
previous and the current
channels.
SUB TV
CH+,-2'
POSITION'" TV
SWAP'; TV
VOL TV
+,- :
Selects preset channels
for the small picture.
Changes the position of
the small picture.
Swaps the small and
the large picture.
Adjust the volume of the
TV.
Set the remote mode using the USE MODE
button and the remote mode buttons.
Selecting the command mode
You can switch the command mode (AVl or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
Press 1 (AVl) (or 2 (AV2)) while pressing
down USE MODE
The indicator lights once (twice for AV2) , then
the command mode switches.
continued