Selecting The Command Mode Of The Remote - Sony STR-DE895 Operating Instructions Manual

Hi-fi receivers: fm stereo/fm-am receiver
Hide thumbs Also See for STR-DE895:
Table of Contents

Advertisement

Remote button description
(continued)
RM-PP412 only
Remote
Operations
Button
MD/TAPE Receiver
AUX
Receiver
RM-PG412 only
Remote
Operations
Button
TAPE
Receiver
MD/DAT
Receiver
2ND
Remote
M1 and
Remote
M2
Notes
• Some functions explained in this section may not
work depending on the model of the receiver.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
• Press MAIN MENU on the remote before you use
the V/v/B/b buttons for receiver operation.
• Press TOP MENU/GUIDE or AV MENU on the
remote before you use the remote to control the
satellite tuner, VCR and DVD player.
• RM-PP412
– (STR-DE895) The AUX, AAC BI-LING, 12 and
ON SCREEN buttons on the remote are not
available.
• RM-PG412
– (STR-DE995) The AAC BI-LING and 12 buttons
on the remote are not available.
– (STR-DE895) The AAC BI-LING, 12 and ON
SCREEN buttons on the remote are not available.
GB
50
Function
To listen to Minidisc or
audio tape.
To listen to an audio
equipment.
Function
To listen to audio tape.
To listen to Minidisc
or DAT deck.
Select the command
mode of the remote.
To perform several
commands in sequence
automatically.
Selecting the command
mode of the remote
Set the remote command mode using the USE
MODE button and the remote command mode
buttons.
Selecting the command mode
You can switch the command mode (AV1 or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
Press AV1 or AV2 while pressing down
USE MODE.
The indicator lights once (twice for AV2) , then
the command mode switches.
To check the command mode of the
remote
Press USE MODE. You can check the remote
by the indicator.
Mode
AV1
AV2
To reset the remote to factory
settings
Press =/1, AV =/1, and MASTER VOL – at
the same time.
The indicator lights 3 times, then goes off.
Indicator lights
once
twice

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-de995Str-de895bStr-de895s

Table of Contents