Selecting The Mode Of The Remote - Sony STR-DE585 Operating Instructions Manual

Remote Operations
Button
ENTER/ VCR/Satellite Enters the selection.
EXEC tuner/
DVD player
EXIT/ VCR/Satellite Returns to the previous
RETURN tuner/
DVD player
n Tape deck
ANT VCR
TV/ VTR
DISC CD player/
VCD player
O VCD player
TV/ TV/VCR
VIDEO
-/-- TV/VCR
SEARCH DVD player
MODE
CLEAR DVD player
MONITOR TV
WIDE TV
JUMP TV
SUB TV
CH+/–*
POSITION* TV
SWAP* TV
VOL TV
+/–*
Function
menu or exits the menu.
Starts play on the reverse
side.
Selects output signal
from aerial terminal: TV
signal or VCR program.
Selects discs (multi-disc
changer only).
Press to go back to the
previous menu.
Selects input signal: TV
input or video input.
Selects the channel
entry mode, either one
or two digit.
Selects searching mode.
Press if you made a
mistake when you press
the number button.
Press to activate TV
control buttons. Press
again to restore original
category.
Selects the wide picture
mode.
Toggles between the
previous and the current
channels.
Selects preset channels
for the small picture.
Changes the position of
the small picture.
Swaps the small and
the large picture.
Adjusts the volume of the
TV.
Remote Operations
Button
MUTING TV
(with
PAUSE)
P IN P* TV
USE Remote
MODE
AV 1 Remote
AV 2
3RD
2ND ROOM
SOURCE Remote
* Only for Sony TVs with the picture-in-picture
function.
Notes
• Some functions explained in this section may not
work depending on the model of the receiver.
• The above explanation is intended to serve as an
example only.
Therefore, depending on the component the above
operation may not be possible or may operate
differently than described.
• The VIDEO 3, TV/SAT, AUX, PHONO, AUDIO
SPLIT, NIGHT MODE, EQ/TONE, ON SCREEN,
/10, /11, /12, 3RD, 2ND ROOM and SOURCE
functions are not available for set operation.
Selecting the mode of the
remote
Set the remote mode using the USE MODE
button and the remote mode buttons.
Selecting the command mode
You can switch the command mode (AV1 or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
Press 1 (AV1) (or 2 (AV2)) while pressing
down USE MODE
The indicator lights once (twice for AV2) , then
the command mode switches.
Function
Mutes the sound from
TV.
Activates the picture-in-
picture function.
Use to program the
remote.
Selects the mode of the
remote.
Selects 2ND AV output.
continued
41
GB