Table of Contents
Advertisement
DAG1000/2000 Series FXS Voice Gateway User Manual
Inquire LAN port IP address
Inquire WAN port IP address
Inquire Phone Number
Setting IP Mode
Network Work Mode
Configure IP Address
Network subnet mask configure
Network Gateway Configure
Renew DHCP
Access Web by Wan in Rout Mode
Reset Factory
Restart Device
Call onhold/offhold
Call by IP
Call Waiting Activate
Call Waiting Deactivate
Blind Transfer
Call Forward Unconditional Activate
Call Forward Unconditional
Deactivate
Call Forward Busy Activate
Call Forward Busy Deactivate
Call Forward No Reply Activate
Call Forward No Reply Deactivate
Do Not Disturb Activate
Do Not Disturb Deactivate
Dial Voicemail
Dial*158# to obtain device WAN port IP address
Dial*159# to obtain device WAN port IP address
Dial*114# to obtain port account
*150*0#, means pppmodem, *150*1#, means static IP,
*150*2#, means obtain IP address by DHCP, *150*3#, means
PPPoE.
*157*0#, set network work mode to routing mode; *157*1#, set
network work mode to bridge mode
*152*+IP, set gateway IP address
*153*+subnet mask, set gateway subnet mask
*156*+gateway IP, set gateway
*193#, set dynamic IP again
Allow access web through WAN port ： *160*1#; don't allow access
web through WAN port ： *160*0#
*166*000000#, reset factory
*111#, restart device
When call process, dial*# into call hold. （ Recovery the call through
hook flash or *# ）
Directly dial the end user IP to call
*51#, enable call waiting function
*50#, forbid call waiting function
If the call transfer to 801, first hook flash and then dial the *
87 * 801#
*72*+ phone number#, transfer the call from the phone number
*73#, forbid call forward unconditional
*90*+ forward busy number#
*91#, forbid call forward busy
*92*+ forward no reply number#
*93#, close this function
*78#, enable DND function
*79#, close DND function
*200#, visit voice mail box
36
Advertisement
Table of Contents
