Advanced; Fxs Parameters - Handcell DAG1000 Series User Manual

DAG1000/2000 Series FXS Voice Gateway User Manual
User ID
Primary/Secondary SIP
Authenticate ID
Primary/Secondary
Authenticate password
Offhook Auto-dial
Auto-dial Delay Time
DND
Caller ID
Number for CFU
Number for CFB
Number for CFNRy
Call Waiting
Play Call Waiting Tone

4.8 Advanced

4.8.1 FXS parameters

FXS characteristic parameters include: Call progress Tone, Timeout for Dialing, Send
Polarity Reversal etc. Configuration interface as follow:
the form of digit similar to phone number or actually a phone number.
SIP service subscriber's Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
SIP password which registers to soft switch/SIP server
Pre-assign an extension or phone number so that automatically dial a number
as soon as you pick up the phone set
Delay 0-3 seconds to automatically dial a number, 0 means dial number
immediately
Do not disturb, the phone set won't receive any calls in case it enabled
Enable or disable caller ID for corresponding port
call forward unconditional, all incoming calls will forward to pre-assigned
number automatically
Call forward on busy, if the line is busy, the call will forward to pre-assigned
number automatically
Call forward no reply, if the line is not answer the call, the call will forward to
pre-assigned number automatically
If call waiting enabled, it will send a special tone if another caller tries to reach
you when you are using your telephone
Enable call waiting tone, caller will hear special tone.
26