Table of Contents
Advertisement
DAG1000/2000 Series FXS Voice Gateway User Manual
to network;
（ 3 ） Telephone is connecting to FXS port of device.
1) Configure dynamic IP address by DHCP ：
Offhook; Dial "*150*2#"; Onhook;
If the equipment hint success, after 10 seconds, and restart the equipment.
(Power-off then power-on)
2) Configure Static IP address
Offhook; Dial "*150*1#"; Onhook;
Then configure IP and mask as follow:
Configure IP address ：
•
Offhook; input "*152*172*16*0*100# "; onhook
Configure subnet mask ：
•
Offhook; input "*153*255*255*0*0# "; onhook
Configure gateway IP address
•
Offhook; input "*156*172*16*0*1# "; onhook.
3) Query the IP address of device: Offhook, input"*158#"
4) If the DAG serial uses PPPoE method to get IP address ， it need to configure by
web browser.
【 Note 】： the telephone will play voice prompt "Setting successfully" if the step is correct
4. WEB Configuration
4.1 WEB Login
Device is connecting to network properly, refer to chapter 3 "Operation". Offhook and
dial*158# to inquire device IP address.
4.1.1 Login
Device LAN port default IP address is 192.168.11.1, WAN port default obtain IP address by
DHCP. Advice to modify the IP address of the local computer equipment and ensure that
10
Advertisement
Table of Contents
