State And Statistics; System Information - Handcell DAG1000 Series User Manual

DAG1000/2000 Series FXS Voice Gateway User Manual

4.3 State and Statistics

4.3.1 System Information

System information interface shows the run information as following figure 4.3.1 below:
System information as follow:
MAC address
Network Mode
Network
WAN Port
LAN Port
DNS Server
System Uptime
Network Traffic
Statics
Version
Figure 4.3-1 System Information
Table 4.3-1 System Information Description
WAN port hardware address. The device ID in HEX format.
Display network mode, include bridge and route. If it is bridge, WAN port display
Network, and the WAN port as same as the LAN port.
Display WAN and LAN port IP address, subnet mask and the way of obtain IP address.
Shows WAN IP address of DAG ,
DHCP mode: all the field values for the Static IP mode are not used (even though
they are still saved in the Flash memory.) The DAG acquires its IP address from the
first DHCP server it discovers from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The DAG willestablish a
PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address,
DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are set to zero
by default.
Shows LAN IP address of DAG. if network Mode is bridge, LAN port won't display.
Display DNS server IP address and default gateway information
Time elapsed from device power on to now.
Total bytes of message received and sent by network port.
Includes: product mode, software version, hardware version and built time etc.
13