Storing Settings; Memory Functions - Mercedes-Benz C Class Owner's Manual

Memory functions*

Storing settings

You can store up to three different set-
tings using the memory button.
The following settings are stored as a sin-
gle memory preset:
I Position of the seat, backrest and head
restraint.
I Driver's side: steering-wheel position
I Driver's side: exterior mirror position
G
Risk of accident
Only activate the memory function on the
driver's side when the vehicle is stationary.
You could otherwise be distracted as a re-
sult of the steering wheel or seat moving un-
expectedly.
The memory button and the storage posi-
tion buttons are located on the door con-
trol panel.
E e
Adjust the seat (
E
On the driver's side, also adjust the
e
steering wheel (
e
rors ( page 90).
E
Press the M memory button.
E
Press one of storage position buttons
1, 2 or 3 within three seconds.
The settings are stored in the selected
storage position.
Nur fuer internen Gebrauch Nur fuer internen Gebrauch
Calling up a stored setting
G
Only activate the memory function on the
driver's side when the vehicle is stationary.
You could otherwise be distracted as a re-
sult of the steering wheel or seat moving un-
expectedly.
E
Press the required storage position but-
ton until the seat, steering wheel and
mirrors are in the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position but-
page 83).
ton.
!
If you want to move the seat from the fully
page 88) and the mir-
reclined position to a stored seat position, first
raise the backrest using the seat switch. The
seat could otherwise be damaged.
Storing a parking position
To make it easier to park, you can store
the front-passenger side exterior mirror
position in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear.
Controls
Memory functions*
Risk of accident
ee
93