Storing Settings* (Memory Package) - Mercedes-Benz CLK-Class Owner's Manual

Storing settings* (memory package)

You can store up to three different settings
for each key using the memory function.
With KEYLESS GO*, it is possible to store a
further three settings for both KEYLESS
GO keys* together. These three settings
are activated for each KEYLESS GO key* if
you operate the vehicle using KEYLESS
GO*.
The following settings are stored:
Seat, backrest and head restraint
position
Driver's side: steering wheel position
Driver's side: exterior mirror position
i
Each additional key has the same settings as
KEYLESS GO*.
G
Risk of accident
Only call up the memory functions on the
driver's side when the vehicle is stationary.
You could otherwise be distracted in the
event of an unexpected steering wheel and
seat movement.
You can deactivate key-dependent set-
tings using the operating system
( page 130).
The memory button and storage position
switch are located in the door control
panel.
P 54.25-2600-31 neu
1 M memory button
2 Storage positions 1, 2, 3
Controls in detail
Storing settings* (memory package)
Make sure that:
the ignition is switched on
or
the respective door is open
Storing
Adjust the seat.
On the driver's side, also adjust the
steering wheel and the mirrors
( page 25).
Turn storage position switch 2 to the
required memory position 1, 2 or 3.
Press the M memory button.
Press the storage position switch
within three seconds.
The settings are stored in this storage
position.
97