Changing the bulbs in the side lamps
and parking lamps
E
Turn one of housing covers 2 or 3
anti-clockwise.
E
Pull out bulb holder 6 with the bulb.
E
Pull the bulb out of the bulb holder.
E
Push the new bulb into the bulb holder.
E
Insert the bulb holder into the head-
lamp and push it in.
E
Put on the housing cover and turn it
clockwise until it clips into place.
Changing the rear bulbs
Tail lamps
E
Switch off the lights.
E
e
Open the boot (
page 80).
E
Remove the trim.
or
E
Open the left-* or right-hand stowage
compartment in the boot.
1 Retaining clips
E
Press retaining clips 1 together and
remove the bulb holder with the bulb.
Right bulb holder, left reversed image
1 Rear foglamp/side marker lamp
2 Side marker lamp
3 Turn signals
4 Parking lamp and brake lamp/tail lamp
Nur fuer internen Gebrauch
Nur fuer internen Gebrauch
Practical advice
Changing the bulbs
5 Parking lamp and brake lamp/tail lamp
6 Reversing lamp
E
Push the corresponding bulb back and
remove it from the bulb holder anti-
clockwise.
E
Insert the new bulb into the bulb holder
and turn it clockwise.
E
Reinsert the bulb holder and lock in po-
sition.
E
Close the side trim panel.
289