Demisting; Thermotronic; Air Distribution; Airflow - Mercedes-Benz C Class Owner's Manual

Setting the air distribution manually
The air distribution is set separately for
each side of the vehicle manually using
buttons a and e.
The symbols in display d have the follow-
ing meanings:
Symbol Meaning
{
Directs air to the windscreen
and side windows through the
demister vents
a
Directs air through the centre
and side air vents and the
dashboard air vent
Y
Directs air into the front and
rear footwells
i
You can also set combinations of air distri-
bution positions.
E Press buttons a and e repeatedly.
The indicator lamp in the U button
goes out. The automatic air-distribution
control is deactivated. Air distribution
is controlled according to the desired
level.
Setting the airflow manually
There are seven different airflow levels for
each side of the vehicle which you can set
separately and automatically or manually
using the Q and · buttons. The air-
flow is controlled in accordance with the
selected level.
E
To increase or reduce the airflow:
press the Q and · buttons to in-
crease or reduce the airflow.
The indicator lamp in the U button
goes out.
E
To increase or reduce the airflow:
press the Q or · button.
The indicator lamp in the U button
goes out. Automatic air distribution re-
mains activated.
Mono function
You can use the mono function to adopt
the settings configured for temperature,
air distribution and airflow on the driver's
side for the front passenger side and the
rear compartment.
Nur fuer internen Gebrauch Nur fuer internen Gebrauch

Thermotronic*

Press the z button.
E
The mono function is switched on/off.
When the mono function is switched
on, the indicator lamp in the button is
lit up.

Demisting

You can use the following settings to de-
mist the windscreen, e.g. when it is cov-
ered with frost.
Switching on
Press the y button.
E
The indicator lamp in the button comes
on.
Thermotronic automatically switches to
the following functions:
I Cooling with air dehumidification on
I Maximum blower and heater output
I Air to the windscreen and the front
side windows
Air-recirculation mode off
I
i
You should only select this setting until the
windscreen is clear again.
Controls
165