Storing Settings - Mercedes-Benz B-Class Electric Drive Operator's Manual

Memory function
86
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat. If somebody
becomes trapped, immediately release the
memory function position button. The adjust-
ment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey is not in the igni-
tion lock.

Storing settings

With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
seat and backrest position
R
driver's side: position of the exterior mirrors
R
on the driver's and front-passenger sides
Adjust the seat ( page 80).
X
Y
Adjust the exterior mirror on the driver's side
X
( page 84).
Y
Briefly press the M memory button and then
X
press preset position button 1, 2 or 3 within
three seconds.
The settings are stored in the selected preset
position. A tone sounds when the settings
have been completed.
Calling up a stored setting
Press and hold the relevant preset position
X
button 1, 2 or 3 until the seat and exterior
mirrors are in the stored position.
i
The setting procedure is interrupted as soon
as you release the storage position button.