Keys And Lamps - NEC D-Term Series E User Manual

Keys and Lamps

LED
Call Waiting Lamp
LCD Display
Exit
Soft Keys
Help
Feature Keys
Speed Dial Keys
Recall
Feature
Answer
Redial
Hold
Transfer
Speaker
Some of the keys listed below have a built-in Light Emitting Diode (LED)
that lights or flashes according to the activity of that function key.
This light will flash when you have an incoming call. The lamp remains
steadily lit when you have a voicemail message waiting.
Liquid Crystal Diode (LCD) display provides D-Term activity information
plus date, time, and Soft Key operation.
To exit from the Menu or Help mode and go back to the time display.
Any feature shown at the bottom of the LCD display is available. Press
>>> for more features.
Explanations of the Soft Keys can be pulled up on the LCD by pressing this
key.
Your phones lines, as well as various other phone features, are located on
these keys.
These keys allow you to program frequently-used phone numbers and
functions into the D-Term's memory. You can then dial the numbers or
engage the features by pressing a single key.
Allows you to hang up a call and immediately get a dial tone.
Used to program Speed Dial Keys.
Allows you to automatically answer calls on your secondary lines.
Allows you to quickly dial a number from a list of previously dialed
numbers.
Press key to place an internal or external call on hold.
Allows you to transfer established calls to another number.
Controls the built in speakerphone feature. The LED light on this key
remains illuminated when the Speaker is on.
2