Making And Receiving Calls - NEC D-Term Series E User Manual

Making and Receiving Calls

TO PLACE AN INTERNAL CALL
Lift your handset or press the Speaker key to receive a dial tone. Dial the desired 5-digit
extension. Use your handset or Microphone to converse.
TO PLACE A LOCAL CALL
Lift your handset or press the Speaker key to receive a dial tone. Dial 9 and wait for the second
dial tone. Dial the desired telephone number. Use your handset or Microphone to converse.
TO PLACE A LONG DISTANCE CALL
You will need to use your assigned V-Net code to place long distance calls. Lift your handset or
press the Speaker key to receive a dial tone. Dial #9 and listen for the interrupted dial tone.
Enter your V-Net code and listen for the service tone (solid, high-pitched tone). Dial 9-1 and the
desired telephone number, area code first. Use your handset or Microphone to converse.
TO DIAL A TOLL-FREE NUMBER
Lift your handset or press the Speaker key to receive a dial tone. Dial 9 and wait for the second
dial tone. Dial the entire toll-free number, including the '1' at the beginning. Use your handset
or Microphone to converse.
TO ANSWER A CALL
Your phone will ring, the Call Waiting Lamp will flash, and the LED light on the ringing line will
flash when you have an incoming call. Press the flashing line appearance key and lift the
handset or press Speaker to answer the call. Use your handset or Microphone to converse.
TO ADJUST THE CALL VOLUME
While you are on a call, press the Up/Down Cursor buttons to increase/decrease the speaker
volume.
4