Manitowoc RF0244 Technician's Handbook page 23

Step 9 Press the OFF switch, then unscrew the ice
chute connector.
Step 10 Using disposable food service grade gloves
insert one dry sponge into the transport tube going to
the evaporator (NOT the tube going to the bin), then
insert one sponge soaked in the sanitizer water
solution. With the pusher tube supplied with the
sponge kit, push sponges all the way down the
transport tube 16 inches (41 cm) or the length of the
pusher tube.
Step 11 Reconnect chute connector and press the
ON switch. Allow the ice machine to run for 10
minutes, then press the OFF switch. Catch and
remove all sponges and ice from the bin/dispenser.
Step 12 Clean and sanitize the bin/dispenser:
• Disconnect power to the dispenser to prevent
injury.
• Use the cleaner and sanitizer ratios from the
charts on the previous page.
• Heavy accumulations of scale will require removal
of components for cleaning and sanitizing.
• Rinse parts with clear water after cleaning - do not
rinse parts after sanitizing.
Step 13 Spray all interior bin/dispenser surfaces with
sanitizer (do not rinse sanitized areas).
Step 14 Place rocker switch in the ON position and
reinstall all removed panels.
1. Lift out ice damper.
2. Remove ice deflector.
A. Remove the two thumbscrews.
Part Number 000007661 7/10 23