Honeywell HT-800 Series Owner's Manual page 2

READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS BEFORE
USING THIS FAN.
When using electrical
appliances, basic pre-
cautions should always
be followed to reduce
the risk of fire, electric
shock, and injury to
persons, including
the following:
1. Use this fan only
as described in this man-
ual. Other use not recom-
mended may
cause fire, electric shock
or injury to persons.
2. This product is intend-
ed for household use
ONLY and not for com-
mercial, industrial or out-
door use.
3. To protect against elec-
tric shock, do not place
fan in window, immerse
unit, plug or cord in water
or spray with liquids.
4. This appliance has a
polarized plug (one blade
is wider than the other).
To reduce the risk of
shock, this plug is intend-
ed to fit only one way in a
polarized outlet. If the
plug does not fit fully in
the outlet, reverse the
INSTRUCTIONS FOR USE AND CARE
plug. If it still does not fit,
contact a qualified elec-
trician. DO NOT attempt
to defeat this safety fea-
ture.
5. Close supervision is
necessary when any
appliance is used by or
near children.
6. Turn the fan to the OFF
position and unplug
the fan from the outlet
when not in use, when
moving the fan from one
location to another and
before cleaning.
7. To disconnect the fan,
grip the plug and pull it
from the wall outlet.
Never pull by the cord.
8. Do not operate the
fan in the presence
of explosive and/or flam-
mable fumes.
9. Do not place the fan
or any parts near an
open flame, cooking or
other heating appliance.
10. Do not operate the
fan with a damaged
cord or plug, if the prod-
uct malfunctions
or is dropped or
damaged in any manner.
(see warranty)
11. Avoid contact with
moving fan parts.
12. The use of attach-
ments not recommended
by
the manufacturer may
be hazardous.
13. Place the fan on a dry
level surface.
14. Do not hang or mount
fan on a wall or ceiling.
15. Do not operate if the
fan housing is removed or
damaged.
16. A loose fit between
the AC outlet (receptacle)
and plug may cause over-
heating and a distortion
of the plug. Contact a
qualified electrician to
replace loose or worn
outlet.
WARNING: To Reduce
The Risk of Fire or
Electric Shock, Do Not
Use This Fan With Any
Solid-State Speed
Control Device.