READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
FOR US MODELS ONLY - This product
employs overload protection (fuse).
A blown fuse indicates an overload or
short-circuit situation. If the fuse blows,
unplug the product from the outlet.
Replace the fuse as per the user servicing
instructions (follow product marking for
proper fuse rating) and check the product.
If the replacement fuse blows, a short-
circuit may be present and the product
should be discarded or returned to an
authorized service facility for examination
Use this fan only as described in this
manual. Other use not recommended,
may cause fire, electric shock or injury
This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
The Honeywell Trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
HT-800 Series, HT-900 Series,
HT-908 Series, HT-9004C and
This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of shock, this plug is
intended to fit only one way in a polarized
outlet. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT attempt to defeat this
Close supervision is necessary when any
appliance is used by or near children.
Turn the fan to the OFF position and
unplug the fan from the outlet when not
in use, when moving the fan from one
location to another and before cleaning.
To disconnect the fan, first turn control
to the OFF position, grip the plug and
pull it from the wall outlet. Never pull
by the cord.
Do not operate the fan in the presence
of explosive and/or flammable fumes.
Do not place the fan or any parts near
an open flame, cooking or other heating
10. Do not operate the fan with a damaged
cord or plug or if the product malfunctions,
is dropped or damaged in any manner
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer
may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on ceiling.
HF-910, HT-908 Series cannot be