Operation; Wall Mounting - Honeywell HT-800 Series Owner's Manual

Super turbo / super tech high performance fan
Hide thumbs Also See for HT-800 Series:
Table of Contents

Advertisement

Available languages

Available languages

The Super Turbo
Performance Fan was
aerodynamically
designed to give you the
versatility of changing
this fan's angular direc-
tion simply by adjusting
the fan to ANY desired
angular output (Fig.1).
Upon using this fan, you
will feel the strong and
powerful air stream that
will quickly move air in
order to cool an area
rapidly and efficiently.
• Place your fan on a
level and dry surface.
• Plug the power cord
into a polarized 120 volt
AC wall outlet.
• To operate your Super
Turbo Fan, turn the con-
• Locate and mark the
position on the wall
where the fan will be
mounted (preferably at a
wall stud).
• Insert a #8 screw (bolt)
into the wall stud. The
High
Fig. 1
trol knob to the desired
fan speed: HIGH (III),
MEDIUM (II) or LOW (I).
• Adjust the fan to the
desired angular air out-
put direction.
screw is not included
and can be purchased at
a hardware store.
• Leave approximately
3/8" of the screw (bolt)
exposed.
INTRODUCTION
Fig. 2

OPERATION

• To move the fan, turn
the fan OFF and pick it up
by the concealed handle
that is located on the
outside rim of the fan
(Fig. 2).

WALL MOUNTING

• Line up the opening on
the base of the fan with
the screw (bolt) and hang
the fan on the wall.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-800c series

Table of Contents