Toshiba 55WL800AZ Owner's Manual page 58

To cancel searching for the AP:
Press BACK while searching for the AP� A message will
appear and press v or w to select Yes and press OK �
Assisted Setup
1
From the Preferences menu, select Network
Setup and press OK �
2
Press s or r to select Wireless Setup and press
OK �
3
Press s or r to select Assisted Setup and press
OK �
4
Press s or r to select the desired AP and press OK �
Note:
Check the MAC address on the label of the AP
or in the manual and select your AP.
5
Select Security Key and press OK � The Software
Keyboard window will appear�
6
Input the Security Key by using the Software
Keyboard ( - page 61)� To save your setting, press
the BLUE button�
Notes:
• The Security Key must adhere to these
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex
characters
• There is only one key ID to set for WEP encryption.
7
Select Done and press OK �
Note:
If Network Name is not displayed, see step 4
and 5 in Manual Setup below to set Network
Name before pressing Done.
Note:
Settings are not saved if BACK is pressed before
Done is selected.
Manual Setup
1
From the Preferences menu, select Network
Setup and press OK �
2
Press s or r to select Wireless Setup and press
OK �
3
Press s or r to select Manual Setup and press
OK �
4
Press s or r to select Network Name and press
OK � The Software Keyboard window will appear�
5
Input the Network Name by using the Software
Keyboard ( - page 61)� To save your setting, press
the BLUE button�
58
Connecting your TV
6
Press s or r to select Authentication and press v
or w to select Open System , Shared Key , WPA-
PSK or WPA2-PSK �
7
Press s or r to select Encryption and press v or w
to select None , WEP , TKIP or AES �
Notes:
• Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only WEP
or None is compatible.
- When Authentication is Shared Key, only WEP is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• There is only one key ID to set for WEP encryption.
8
Press s or r to select Security Key and press OK �
9
Input the Security Key by using the Software
Keyboard ( - page 61)� To save your setting, press
the BLUE button�
Note:
This item is greyed out when Encryption is
None.
10
Select Done and press OK �
Note:
When Encryption is None, a message will
appear. Press v or w to select Yes and press
OK.
Note:
Settings are not saved if BACK is pressed before
Done is selected.
Enhanced 11n
When Enhanced 11n is set to On , the Dual Channel
(40MHz) feature is available�
Note:
In addition, some other optional 11n features will be
enabled.
1
From the Preferences menu, press s or r to select
Network Setup and press OK � Select Wireless
Setup and press OK �
2
Press s or r to select Enhanced 11n and press v
or w to select On �