Sleep Timer; Resetting The Tv - Toshiba 55WL800AZ Owner's Manual

5
Press P u to advance to the next page, or press P U to
go back to the previous page�
Note:
When a timed programme is about to start, an
information screen will appear offering the option of
watching or cancelling the programme. The menus and
other channels will not be available during the timed
programme unless the programme timer is cancelled.
On Timer
The feature allows you to set the TV to turn on
automatically to a preset channel or input at a certain time
of day or after a certain length of time�
1
From the Function menu, press s or r to select
On Timer and press OK �
2
Press s or r to select Enable On Timer and press
v or w to select On �
On Timer
Enable On Timer
Enable DTV Clock
Power On Time
Repeat
Input
Channel
Volume
Time until Power On
3
Press s to select Enable DTV Clock and press v
or w to select On or Off �
4
Press s or r to go through the list adding the details
of the on timer by using the number buttons and v or
w to make selections�
Power On Time (only when DTV Clock set to On):
Set the time you prefer with the number buttons�
Repeat (only when DTV Clock set to On): Select the
desired on timer operation ( Once , Every Day , Mon-
Fri , Mon-Sat , Sat-Sun )�
Input : Select a video input source ( ATV , DTV ,
EXT 1 , EXT 2 , EXT 3 , HDMI 1 , HDMI 2 , HDMI 3 ,
HDMI 4 or PC )�
Channel : Set the channel that will be tuned when the
TV turns on�
Note:
When an external input is selected in the Input
field, this feature cannot be selected.
Volume : Select the volume level that will be set when
the TV turns on�
Time until Power On (only for DTV Clock Off
mode): Set the amount of time from now until the TV
turns on using the Number buttons (maximum of 12
hours)�
38
Using the TV's features (General)
On
On
00:00
Once
DTV
30
00:00
Done
5
When all the details have been entered, select Done
and press OK to start the timer�
To cancel the On Timer
1
From the On Timer menu, select Enable On Timer �
2
Press v or w to select Off and press s or r to select
Done , and press OK �
Setting the Sleep Timer
The Sleep Timer is especially useful if you want the TV to
turn itself off after a selected period of time�
1
From the Function menu, press s or r to select
Sleep Timer �
2
Press the Number buttons (0-9) to enter the amount
of time until the TV turns off� Alternatively, press v
or w to adjust the time in blocks of 10 minutes up to
12 hours�
3
Press EXIT to start the timer�
To cancel the sleep timer:
Press s or r until the time is set to 00:00�

Resetting the TV

Reset TV will reset all TV settings, including stored
channels, to their original factory values�
1
From the System Setup menu, press s or r until
Reset TV is selected�
System Setup
DTV Settings
Quick Setup
Location
USB 2 Port Setup
Software Upgrade
Software Licences
System Information
Reset TV
2
Press OK to select�
A screen will appear warning that all settings will be
lost� Select Yes and press OK to continue�
When the set powers back on, the Menu Language
screen will appear ( - page 13)� Press OK to continue
and proceed to the Auto Tuning menu ( - page 17)�
If PIN code has been set, the PIN Settings screen will
appear ( - page 45)� Only 3D PIN code has been set,
the 3D PIN will appear ( - page 36)�
Antenna
Home
Recorder