Toshiba 55WL800AZ Owner's Manual page 36

3
Press v or w to select Side by Side , Top and
Bottom or Native �
Trigger of Switching
Display Mode
Input Signal
Additional
Type Format
Information
FP
With 3D
Auto Detect
SBS
Information
3D
Format
TAB
Signal
SBS
Without 3D
Auto Detect
Information
TAB
2D Format Signal
* Correct 2D image
Note:
Take off the 3D glasses in 2D mode.
To switch to Native mode:
• Press 3D while viewing 3D mode�
• Press 3D while viewing 2D to 3D mode�
Note:
When 3D format signal with 3D Auto Detect
Information is received, it is not possible to
switch to Native.
From the Quick Menu in 2D mode.
Note:
When 3D format signal with 3D Auto Detect
Information is received, it is not possible to
switch to Native.
• From the Quick menu in 2D mode�
1
Press QUICK � Select 3D Settings�
2
Press s or r to select 2D Format Select �
Press OK �
3
Press v or w to select Native �
Note:
When Frame Packing is input, 3D Settings will be
greyed out.
To switch to 2D to 3D mode:
Press 3D and select 2D to 3D while viewing 2D or Native
mode�
36
Using the TV's features (General)
Quick menu
2D Format Select
Source
SBS TAB Native
Signal
3D
3D
*
3D 3D 3D 3D
*
3D 3D
3D 3D
*
3D 3D 3D 3D
*
3D 3D
3D 3D
*
2D
2D
2D
Note:
Depending on the input mode, the display mode
switches between 2D and 3D.
Setting the Auto Start mode
This mode controls what the TV does when it detects a 3D
format signal with 3D Auto Detect Information�
1
From the Preferences menu, press s or r to select
3D Setup and press OK �
2
Press s or r to select 3D Auto Start and press v
or w to select 3D , 2D or Off �
Option Description
3D Displays as 3D mode automatically when
3D format signal with 3D Auto Detect
Information is received�
2D Displays as 2D mode automatically when
3D format signal with 3D Auto Detect
Information is received�
Off Displays a screen that allows you to select
3D or 2D when 3D format signal with 3D
Auto Detect Information is received�
Setting the 3D PIN code
A 3D PIN code is necessary for using the 3D Safety
Settings�
To enter a new PIN code:
1
From the 3D Setup menu, press OK and press s or
r to select 3D PIN Setup �
2
Press OK and press the Number buttons to enter a
4-digit number�
Confirm the code.
Note:
PIN code cannot be set to "0000".
To change or delete your PIN code:
1
From the 3D PIN Setup menu, press the Number
buttons to enter your 4-digit PIN code�
2
Select Change PIN or Delete PIN and press OK �
Notes:
• PIN code cannot be set to "0000".
• If PIN is deleted, 3D Safety Settings is greyed out,
and the settings are reset to the factory defaults.
Setting 3D Start Message
When this feature is set to On, a message is displayed on
the screen when a 3D signal is received�
1
From the 3D PIN menu, press s or r to select 3D
Safety Settings and press OK �