Periodic Maintenance; Esd Protection; Connector Insertion Cycles - IBM C1B 1.12 Brick On Sled Carrier 128-pin HPC Specification Sheet

O E M FUNCTIONAL SPECIFICATION ULTRASTAR XP (DFHC) SSA MODELS 1.12/2.25 GB - 1.0" H I G H
Install Defect Free percentage

6.10 Periodic Maintenance

None required

6.11 ESD Protection

The Ultrastar XP SSA disk drives contain electrical components sensitive to damage due to electrostatic
discharge (ESD). Proper ESD procedures must be followed during handling, installation, and removal. This
includes the use of ESD wrist straps and ESD protective shipping containers.

6.12 Connector Insertion Cycles

Live insertion and removal of the electrical connector causes pitting on the connector terminals. Because of
this the number of live insertion and removal cycles must be limited.
Maximum Insertion/Removal Cycles (for hot and normal insertion) 25
Page 76 of 87
USER RESPONSIBLE F O R VERIFYING VERSION A N D COMPLETENESS
99.99 percent
IBM Corporation
Source filename=POH