ECS H67H2-M v 1.1 Manual page 69

64
4. When done, press <Enter> to confirm the creation of the RAID set. A
Pressing <Y> deletes all the data in the HDDs.
5. The following screen appears, displaying the relevant information about
Users please be noted that RAID 0 (Stripe) is set to accelerate the data
access, and RAID 1 (Mirror) is set to provide the data backup. If you want
to set RAID 0, you need to set the 2nd Boot Device item in the BIOS to
Intel Volume0. See section "Advanced Setup" for details.
Intel
dialogue box appears to confirm the action. Press <Y> to confirm; other-
wise, press <N>.
the RAID set you created.
® Matrix Storage Manager RAID Configurations