ECS H67H2-M v 1.1 Manual page 24

SATA3~5: Serial ATA connectors
These connectors are used to support the Serial ATA 3Gb/s devices, simpler disk drive
cabling and easier PC assembly. It eliminates limitations of the current Parallel ATA
interface. But maintians register compatibility and sofeware compatibility with Prallel
ATA.
Pin Signal Name
1
Ground
3
TX-
5
RX-
7
Ground
F_USB1~4: Front Panel USB headers
The motherboard has four USB 2.0 headers supporting eight USB 2.0 ports. Addi-
tionally, some computer cases have USB ports at the front of the case. If you have
this kind of case, use auxiliary USB connector to connect the front-mounted ports to
the motherboard.
Unlike F_USB2~4 in this mainboard, F_USB1 supports EZ Charger technology,
provides 3 times current than general USB port in off mode for USB devices. It is
useful and excellent, especially for the iPhone, iPad and iPod touch devices that need
a large amount of current for faster recharging within less time.
Pin Signal Name
1
USBPWR
2
USBPWR
3
USB_FP_P0-
4
USB_FP_P1-
5
USB_FP_P0+
6
USB_FP_P1+
7
GND
8
GND
9
Key
10
USB_FP_OC0
Please make sure that the USB cable has the same pin assignment as
indicated above. A different pin assignment may cause damage or system
hang-up.
Pin Signal Name
2
TX+
4
Ground
6
RX+
-
-
Function
Front Panel USB Power
Front Panel USB Power
USB Port 0 Negative Signal
USB Port 1 Negative Signal
USB Port 0 Positive Signal
USB Port 1 Positive Signal
Ground
Ground
No pin
USBOC-
Installing the Motherboard
19