DSC Power 832 Installation Instructions Manual page 3

S
1.1 Specifications
PC5100 2-Wire Addressable Device Interface Module
• The PC5100 is an interface module for the PC5010 and PC5015
alarm control panels. The module is used to connect 2-wire
addressable devices to the Power832 Security System.
• Current draw: 40mA
• Addressable loop maximum current draw: 170mA
• Up to 32 2-wire addressable devices can be added to the system
• Compatiblilty PC5010 v2.x or higher; PC5015 v2.x or higher.
Addressable Multiplex Loop (AML) Devices
All addressable series devices use a 2-wire connection for power and
to communicate with the control panel. This simplifies wiring and
permits fast and efficient installations.
WARNING: Connect only DSC Addressable Series devices to the
addressable loop connections. Connection of ANY other type of
device will impair operation. Any devices other than Addressable
Series devices which require power to operate must be powered
separately.
ADDRESSABLE DEVICE CURRENT LOADING
Device
AMS-220/AMS-220T
AMB-300
AMB-500
AMB-600
AMA-100
AMP-700/AMP-701
*Always use the Standby Current Draw when calculating maximum
wire run lengths.
Overview
E C T I
Description
Smoke Detector
Motion Detector
Ceiling Mount Motion Detector
Pet Immune Motion Detector
Glassbreak Detector
Contact
1
O N 1
Standby* Alarm
0.8 mA 1.5 mA
2.5 mA 2.5 mA
2.5 mA 2.5 mA
3.5 mA 3.5 mA
3.5 mA 3.5 mA
0.8 mA 0.8 mA
Test
1.5 mA
5.0 mA
5.0 mA
6.5 mA
5.5 mA
0.8 mA