Nikon COOLPIX AW1100 Quick Start Manual page 32

I
Notice for Customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known to
the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road,
Melville, New York 11747-3064
USA
Tel: 631-547-4200
Notice for Customers in Canada
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numerique de Ia classe Best
conforme
a
Ia norme NMB-003 du Canada.
{fj)
Notices
Caring for the camera
To ensure continued enjoyment of this
Nikon product, observe the following
precautions when using or storing the
device.
~
Do Not Allow Damp to Enter Inside
the Camera
The COOLPIX AW11 0 is provided with JIS/IEC
protection class 8 (IPXS) equivalent waterproofing.
If water seeps inside the camera, however, this
could cause the components to rust and result in a
high repair charge or the camera may not be
repairable. After using the camera at the beach or
underwater, make sure that the battery-chamber/
memory card slot cover is firmly closed, and then
immerse the camera in a shallow container filled
with fresh water for ten minutes. After using the
camera underwater, do not leave the camera wet
for 60 minutes or more. This could cause
deterioration of the waterproofing performance.
~
Prevent Water from Seeping Inside
the Camera
If the inside of the camera becomes wet, this could
result in camera malfunction and the camera may
not be repairable. To prevent water seeping (water
submersion) accidents, be sure to observe the
following cautions when using the camera.
• When the battery-chamber/memory card slot
cover is closed, make sure that the camera strap,
hair, lint, dust, sand grains, other foreign
substances, or dirt are not attached on the
waterproofing packing and portions that make a
contact with the waterproofing packing.
• Do not open and close the battery-chamber/
memory card slot cover in areas exposed to
water spray, high winds, dust or sand.
• When an external force is applied on the camera,
it could become deformed or the airtight seals
may become damaged and cause water to seep
inside the camera. Do not place a heavy object
on the camera, drop the camera, or apply
excessive force on the camera.