Create Log (Record The Log Of Moving Information) - Nikon COOLPIX AW1100 Quick Start Manual

GPS Options Menu

Create Log (Record the Log of Moving Information)

Press the d button M z (GPS options) menu icon (A8) M Create log
When log recording starts, the measured moving information is recorded until a
preset time has elapsed at the interval set for Log interval.
• The recorded log data cannot be used by itself. To use the data, end log
recording and save it to a memory card.
1
Use the multi selector to select a log to be
recorded, and press the k button.
• Select a log to be recorded from the following logs.
- Start all logs: The position information, altitude and
water depth information log data is recorded.
- Start GPS log: The position information log data is
recorded.
- Start depth log: The water depth information log data is recorded.
2
Select the log interval that will be used for
recording a log, and press the k button.
• The intervals that can be set for recording a log vary
depending on the log to be recorded.
3
Select the duration that the log will be
recorded, and press the k button.
• Log recording starts.
• The log data is recorded at the interval set for the Log
interval until the preset time is reached.
• When Start depth log is selected, the duration for
recording the log cannot be selected. The duration for
recording the log is fixed at 1 hour.
• D is displayed on the screen during log recording
(A10).
E62
Create log
Start all logs
End all logs
Start GPS log
End GPS log
Start depth log
End depth log
Log interval
15 s
30 s
1 min
3 min
5 min
10 min
Start log
Log data for next 6 hrs
Log data for next 12 hrs
Log data for next 24 hrs
Log data for next 72 hrs
Log display (GPS)
15m 15m 15m
29m 0s 29m 0s 29m 0s
1010hPa 1010hPa 1010hPa
Log display (altitude
or water depth)
970 970 970