Table of Contents
Advertisement
The Setup Menu
Option
Auto off
Format memory/
Format card
Language
TV settings
Blink warning
Wi-Fi options
Eye-Fi upload
Reset all
Firmware version
96
Set the amount of time that passes before the monitor
is turned off to save power. The default setting is 1 min.
Format the internal memory (only when a memory card
is not inserted) or the memory card (when a memory
card is inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important
images to a computer and save them before
formatting.
Change the camera's display language.
Adjust settings for connection to television.
• When the camera is connected to a television using
an audio/video cable but no picture is displayed on
the television, set Video mode to NTSC or PAL
according to the type of signal compatible with the
television.
• HDMI settings can be set.
When the camera detects that a human subject may
have closed the eyes immediately after taking a picture
using face detection while shooting with modes other
than the smart portrait (A62), the Did someone
blink? screen is displayed on the monitor to check the
picture taken. The default setting is Off.
To connect the camera to your smart device, set the
Wi-Fi network (wireless LAN) to on. You can also change
network information such as the camera's SSID and
password.
Set whether or not to enable the function for sending
images to a computer using a commercially available
Eye-Fi card. The default setting is Enable (when an Eye-
Fi card is in the camera).
Reset the camera's settings to their default values.
• Some of the settings such as Time zone and date
and Language are not reset.
Display the current camera firmware version.
Description
A
E78
E79
E79
E80
E81
E82
E84
E85
E88
Advertisement
Table of Contents
