Wildview Infrared Xtreme TGLX8IR Series Instruction Manual page 8

WARNING: Do not use different Voltage lead acid battery other than the
one specified in this section. Doing so will damage the camera and will
void the warranty.
WARNING: ALWAYS have the camera in the OFF position when installing
or removing batteries and memory card. Removing batteries or memory
card while the camera is ON may damage the camera.
Your Wildview Digital Scouting Camera is designed to operate using two
different types of battery power options.
Batteries "C" cell
The internal battery compartment accepts 4 "C" cell batteries. Be sure to use
high quality brand name alkaline batteries. Install batteries with correct
polarity (+/-) as noted inside the battery compartment.
12V Lead Acid External Battery
The camera is equipped with an external power jack designed to accept a
barrel plug cable that attaches to a sealed lead acid battery. (Sold separately).
This will enhance the camera's field life. Battery cable and complete 12V
Lead Acid battery kits are available wherever Wildview scouting cameras are
sold, or call toll free 888-304-6125. Only Wildview external battery
accessories are recommended.
1. Make sure camera is in the OFF position.
2. Insert the external battery barrel plug into the DC 12V jack on the bottom
of camera housing.
3. Turn the camera to the ON position.
www.wildviewcam.com
Toll Free 888-304-6125
8