Operating Your Ceiling Fan; Turning - Emerson PRIMA SNUGGER CF905BS00 Owner's Manual

Prima snugger
Hide thumbs Also See for PRIMA SNUGGER CF905BS00:
Table of Contents

Advertisement

12. Engage the connector of the switch housing
assembly with the fan motor assembly connector
(Figure 12). The two connectors are keyed and
color-coded and must be mated correctly (color-to
color) before they can be engaged. Make sure the
connector latch closes properly.
13. Remove the four switch housing assembly
mounting screws from the switch housing plate and
retain for future use (Figure 12).
NOTE: To install an accessory light kit, remove
switch housing and make light kit electrical
connections to blue and white leads marked "For
Light" in the switch housing. Follow light kit
instructions for wiring and installation. Then
reinstall switch housing as outlined above.
NOTE: The supplied wall control can not be used to
control the operation of an accessory light kit. The
blue fan wire located on top of the motor assembly
must be connected to a second "HOT" supply wire
that is not attached to the supplied wall control.
See your Emerson dealer for optional remote
control options that can control the fan and
accessory light kit using a single "HOT" supply
wire.
14. Position the switch housing assembly on the switch
housing plate and align the holes in the switch
housing assembly with the holes in the plate.
Secure the switch housing assembly by reinstalling
the four screws removed previously (Figure 13).
1. All fans are shipped from the factory with the
reversing switch positioned to circulate air downward.
If airflow is desired in opposite direction, turn your fan
off and wait for the blades to stop turning, then slide
the reversing switch to the opposite position, and turn
fan on again (Figure 14).
2. The fan blades will turn in the opposite direction and
reverse the airflow.
3. You have now completed the assembly of your new
ceiling fan.
Reverse Switch Information
Season
Rotation Direction
Summer
Counter-Clockwise
Winter
Clockwise
5. Ceiling Fan Assembly

6. Operating Your Ceiling Fan

Switch Position
Left
Right
(continued)
MOTOR CONNECTOR
SWITCH HOUSING
CONNECTOR
Figure 12
Figure 13
REVERSE SWITCH
Figure 14
Please contact 1-800-654-3545 for further assistance
9
SWITCH HOUSING
MOUNTING SCREW (4)
MOUNTING
SCREWS (4)
SWITCH
HOUSING
ASSEMBLY
emersonfans.com
U.L. Model No.: CF905

Advertisement

Table of Contents
loading

Table of Contents