Programming Options
Programming options control your system's normal, operational set-up.
Most options do not require additional parts, but some may require ad-
ditional installation labor. This system's programming options are listed
below, with the factory default settings in
12
, 24, or 60 minute run time. your system can be programmed
•
to allow the vehicle to run for 12, 24, or 60 minutes when remote
started. Can be programmed from 1 -60 minutes.
•
3, 6, 9, or
programmed to allow the vehicle to run for 3, 6, 9, or 12 minutes
when remote started in timer mode. Can be set from 1-16 minutes
by your installer.
•
Comfort closure is a programming option which closes the ve-
hicle's windows after remote locking.
Parking lights flashing or constant. Your system can be pro-
•
grammed to either flash or to turn on the parking lights constantly
during the entire remote start operation.
•
Ignition switch-controlled door-locking
on, the doors will lock 3 seconds after the ignition key is turned on,
and unlock when the ignition key is turned off.
•
The horn honk confirmations for locking and unlocking can be
programmed
connected to the system.
© 2010 Directed Electronics. All rights reserved.
12
minute timer mode run time. Your system can be
on
or Off. In order for this feature to work, it must be
bold
:
on
or Off. With this feature
13