Programming Options - Directed Electronics PYTHON 413 Owner's Manual

Programming Options

Programming options control your system's normal, operational set-up.
Most options do not require additional parts, but some may require ad-
ditional installation labor. This system's programming options are listed
below, with the factory default settings in
12
, 24, or 60 minute run time. your system can be programmed
•
to allow the vehicle to run for 12, 24, or 60 minutes when remote
started.
• 3, 6, 9, or
programmed to allow the vehicle to run for 3, 6, 9, or 12 minutes
when remote started in timer mode. Can be set up from 1 to 16
minutes by your installer.
• Comfort closure is a programming option which closes the ve-
hicle's windows after remote locking.
• Parking lights flashing or
to either flash or to turn on the parking lights constantly during the
entire remote start operation.
• Ignition switch-controlled door-locking
on, the doors will lock 3 seconds after the ignition key is turned on,
and unlock when the ignition key is turned off.
• The horn honk confirmations for locking and unlocking can be
programmed
on, the horn must be connected to the system.
© 2009 Directed Electronics. All rights reserved.
12
minute timer mode run time. Your system can be
constant. Your system can be programmed
on
or Off. In order for this feature to be programmed
bold
:
on
or Off. With this feature
11