Remote Control Functions; Standard Configuration - Directed Electronics 474A Owner's Manual

Remote control functions

The remote buttons are used to send commands to the system. The but-
tons indicated below are for standard configuration.

Standard configuration

Button
The lock function is controlled by pressing
one second. When held for more than 1.5 seconds, Panic is activated.
AUX
AUX
AUX
Button
The unlocking function is controlled by pressing
AUX
AUX
trol for one second. You can also turn Panic off with this button.
AUX
Button
Silent Mode
™,
pressing
second before locking or unlocking.
AUX
AUX
An optional auxiliary function such as trunk release may be controlled
AUX
by pressing and holding
Button
AUX
AUX
The remote start function of your system is controlled by pressing this
AUX
button for one second.
and
Car Finder is controlled by pressing these two buttons.
© 2010 Directed Electronics. All rights reserved.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
and an optional auxiliary function are controlled by
Silent Mode works by pressing
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Buttons
AUX
AUX
for 1.5 seconds.
on the remote control for
AUX
on the remote con-
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry
AUX
AUX
AUX
for less than one
Your 1-way remote coin cell battery can be changed by using a small
3