Out Of Range Indication; Locking The Handset Keypad; Paging - Hyundai HDT-H13 User Manual

Out of Range Indication

The bars at the right of the
received from the base. If you are too far from the base, the radio signal
might become too weak and the phone might not access the telephone line.
In these conditions you can't make or receive phone calls, for this reason,
the icon turns to red.
Locking the Handset
This function is useful to avoid unwanted function activations by accidentally
pressing any keys when you are carrying your handset. If you activate the
key lock, the keys are inhibited, except for the
If you switch the handset off and on again, the key lock is automatically
disabled.
In this condition, when a call comes in, you can answer the call by pressing
the ACCEPT key. When the call ends, the keys will be locked again.
To lock the keys , in the Standby mode just keep the
display shows the key lock icon
To unlock the keys , keep the
disappears from the display.

Paging

You can page the handset from the base unit making it ringing with a
special ring. It's useful to locate a lost handset or call the user who currently
has the handset.
To send the paging signal , briefly press the
base. All the phones registered with the base ring for 15 seconds.
To stop the paging signal before 15 seconds are passed
again or any keys on the handset.
Note
If a call comes in while the handset is being paged, the handset stops the paging
operation and starts ringing normally in order to allow you to answer the call.
21
icon continuously show the signal strength
Keypad
ACCEPT key.
key pressed till the
0
.
key pressed again till the key lock icon
Paging key located on the
PAGE
, press the Paging
Caller ID on Call Waiting
When you have subscribed to call waiting service from your local company,
this telephone will indicate the name and number of the second caller while
you are having a conversation with the first caller.
Press the R key to answer the second caller. When you want to transfer to
the first call, press the
first caller.
0
R key again to continue your conversation with the
30