Table of Contents
Advertisement
Resetting the Handset or the Base
If you reset the handset or the base, all the user selectable features restore
to the factory preset initial settings: all the numbers in phonebook will be
erased, as well as the incoming/outgoing call lists etc. But the Flash time
can not be reset.
You can reset the handset without resetting the base or vice versa, it
depends on the scope you have. It is mainly useful for these purposes:
If you have made many wrong settings and you want to restore the
handset to the factory preset initial settings.
If the phone shows logical malfunctions (not correct symbols on the
display, incorrect behavior etc.), the problem can be caused by an AC
power supply noise or an electrostatic spike which can temporarily alter
the memory of the internal microprocessor. In this case the reset could
solve the problem.
Resetting the Handset
1
Press
MENU
key to display the main menu items.
Press the navigation keys
2
SELECT
key.
3
Press the
Up
or
Down
key to choose
4
The handset asks you to enter the current handset PIN code (the
default PIN is
1590
). Use the numeric keys to enter and press
SELECT
key, then the display shows "
key to confirm.
5
Press the
key to exit.
Resetting the Base
1
Press
MENU
key to display the main menu items.
Press the navigation keys
2
SELECT
key.
The handset asks you to enter the current base PIN code (the
3
default PIN is
1590
). Use the numeric keys to enter and press
SELECT
key.
35
H/Set Setting
to choose
, then press the
Handset Reset
.
Reset?
", press the
SELECT
Base Setting
to choose
, then press the
Choosing the Dial Mode
In order to provide compatibility with other telephone systems, your phone
can be set to either pulse dialling (rotary), or tone dialling (DTMF). To
change the dialling mode:
1
Press
MENU
key to display the main menu items.
2
Press the navigation keys
press the
SELECT
key. Enter the current base PIN(preset to
and press the
SELECT
key.
Press the
Up
or
Down
key to choose
3
SELECT
key. The current setting appears.
Press the
Left
or
Right
key to choose
4
the
SELECT
key to save the selection.
Setting Date & Time
In Standby mode, the unit can show the current date and time to help you
keep your appointments.
You need to set the date and time so that the date and time when
messages or calls are received can be displayed correctly.
1
Press
MENU
key to display the main menu items.
2
Press the navigation keys
press the
SELECT
key.
Press the
SELECT
key to choose
3
displayed: the time on the upper line in the Hours:Minutes format
and the date in the Day-Month format in the lower line.
Base Setting
repeatedly to choose
, then
1590
)
Dial Mode
, then press the
DTMF
or
PULSE
, then press
Extra
repeatedly to choose
, then
Clock
. The current settings are
16
Advertisement
Table of Contents
