Table of Contents
Advertisement
Receiving a Call
When a call is received, the phone rings and the display shows "
Call
". If the incoming call can be identified (i.e. caller's information is
transmitted from the network on which the call was made and the caller
doesn't hide it) you will also see the caller's number in the display.
Answer the call
, by pressing the
handset is on the base and you have activated the "
(See page 36 for details), simply pick it up to answer the call, you don't
need to press any key. During the conversation, the display shows the
elapsed time.
To end the call, either press the
Note
The caller's identification can work only if your telephone network supports the
service as well as the caller's one. However the caller can still hide his/her number.
Adjusting Voice Volume
During a conversation, press the
earpiece volume (or the handsfree speakerphone one, if activated). You can
adjust the volume in five levels which are showed by the bars of the icon
The more bars filled blue, the louder the volume. When the last bar is filled
red, this means the voice volume reach the maximal level.
Muting a Call
During a conversation, you can temporarily mute the microphone so that the
party on the other end of the line cannot hear you. During the period you
can still hear the him/her. This mode allows you to have a conversation with
someone near you and avoid that the party at the phone is hearing what
you are saying.
To mute you microphone
, just press the
the icon
will appear on the display.
To unmute the microphone
, just press again the
disappear and you will restore the normal condition.
19
Incoming
key or the
ACCEPT
key. Or if the
Auto Answer
" function
key or replace the handset on the base.
Up
or
Down
key to adjust the level of the
Right
key during the conversation:
Right
key: the icon
Press the navigation keys
2
SELECT
key.
3
Press the
Press the
4
appear at the right of the
5
5
Press again the
icon
will disappear.
Note
For a normal use, we recommend to leave the key tone enabled: they make the
use of the phone easier.
Changing Handset & Base PIN
Base and handset PIN's are required to protect your phone against
unauthorized use. There are set to
PIN's as follows:
.
Changing Handset PIN
1
Press
MENU
Press the navigation keys
2
SELECT
key.
Press the
3
SELECT
key.
4
Enter the current PIN code, then press the
Enter the new four-digits PIN you want to use, and press the
5
SELECT
key.
will
H/Set Setting
to choose
Up
or
Down
key to choose
Key Tone
SELECT
key to activate the function, the
Key Tone
item.
SELECT
key to deactivate the function, and the
1590
at the factory. You can change the
key to display the main menu items.
H/Set Setting
to choose
Up
or
Down
key to choose
PIN Code
SELECT
, then press the
.
icon will
, then press the
, then press the
key.
32
Advertisement
Table of Contents
