Table of Contents
Advertisement
Setting Display
Using this feature, you can customize the standby display according to your taste
and needs (wallpaper and color).
Adjusting the Display Contrast
This adjustment will allow you to optimize the visibility of the display by
changing its contrast according to the environment conditions.
1
Press
MENU
key to display the main menu items.
Press the navigation keys
2
press the
SELECT
key.
Press the
Up
or
Down
key to choose
3
the
SELECT
key.
Press the
SELECT
key to access
4
appears on the display.
Press the navigation keys
5
available contrast levels, then press the
Selecting the Wallpaper
1
Perform steps 1 to 3 of previous paragraph.
Press the
Up
or
Down
2
SELECT
key. The current setting appears on the display.
Press the navigation keys
3
wallpaper images, then press the
37
H/Set Setting
repeatedly to choose
Display setting
, then press
Contrast
. The current setting
repeatedly to choose among the 11
SELECT
key.
key to choose
Wallpaper
, then press the
to choose among 10 pre-defined
SELECT
key.
Turning Handset On/Off
When you place the handset on the base, it automatically turns on.
To turn the handset on
the display on.
To turn the handset off
message appears. Then the display turns off.
Note
Nothing will appear on the display when the battery power is very low. You should
, then
fully charge the handset before using it.
Registering a New Handset
You can register to your base additional handsets (up to 5 in total) in order
to share the same line with other people. To do that you should assign a
number to each new handset you will register. As you know, the supplied
handset is already registered with the number 1, in fact it shows
security reasons, the registration procedure can be done only by people
who are nearby your base and know the
authentication code.
Press and hold the
1
then release the button.
2
Press
Press the navigation keys
3
press the
4
Press the
the
SELECT
(when it's off), press the
, keep the
button pressed until "
base
PIN which acts as phone's
button on the base unit for about 3 seconds,
PAGE
MENU
key to display the main menu items.
repeatedly to choose
SELECT
key.
Up
or
Down
key to choose
Register H/Set
key.
button then you switch
Goodbye!
"
HS(1)
. For
H/Set Setting
, then
, then press
14
Advertisement
Table of Contents
