Table of Contents
Advertisement
5
Press the
Up
or
Down
Press the
SELECT
key in order to search the base. The display
shows "
Searching:
".
Press
SELECT
key to confirm, then the display asks you to enter
6
the
base
PIN code (preset to
authentication code (AC). Enter this code and press the
key.
If the registration has performed successfully, the new handset will
7
show the phone and base numbers (e.g.
to Standby mode.
Note
A handset can be registered to up to 4 different base units in order to extend the
radio coverage. A base can be used with up to 5 handsets in total. Obviously the
base can be accessed by one handset a time (because a base is connected to
one line).
Deactivating a Handset
If necessary, you can clear the registration of a registered handset in order
to stop its access to one or more base units, but you can not deactivate the
handset you are using. Just follow these steps:
1
Press
MENU
key to display the main menu items.
2
Press the navigation keys
press the
SELECT
key. Enter the current base PIN (preset to
and press the
SELECT
key.
Press the
Up
or
Down
key to choose
3
the
SELECT
key. Press the numeric key related to the handset
number you want to clear the registration, then press the
key. The display of the handset which you have cleared the
registration shows
NOT SUB
the base.
15
key to choose the base number you want.
1590
) which acts as phone's
SELECT
HS(2) BS(1)
) and returns
Base Setting
repeatedly to choose
Release Handset
, then press
SELECT
and it cannot be used anymore with
4
Press the
5
The display shows "
6
Press the
Notes
Be careful! When you reset the handset you will lose any date stored in it (e.g.
name and numbers in phonebook). Don't forget to note them down before
resetting the handset.
Resetting the base does not affect the handsets registered to the base.
Setting Auto Answer
With this feature, you can answer a call by just picking up the handset from
the base without pressing any key.
1
Press
MENU
Press the navigation keys
2
SELECT
Press the
3
SELECT
the right of the
, then
Press again the
1590
)
4
icon will disappear.
Up
or
Down
key to choose
Base Reset
B Reset
", press the
SELECT
key to exit.
key to display the main menu items.
H/Set Setting
to choose
key.
Up
or
Down
key to choose
Auto Answer
key to activate the feature, and the
Auto Answer
item.
SELECT
key to deactivate the function, and the
.
key to confirm.
, then press the
, then press the
icon will appear at
36
Advertisement
Table of Contents
