Kenwood KVT-514 Instruction Manual page 111

Installation/Removing the Unit
Removal Tool (Accessory @)
Removal Tool
(Accessory @)
~~~
~
Be careful to avoid injury from the catch pins on the
removal tool
3. Lower the removal tool toward the bottom, and
pullout the unit halfway while pressing towards
the inside.
~
~
1. Remove the hard rubber frame by referring to the
removal procedure in the section <Removing the
Hard Rubber Frame>.
2. Insert the two removal tools @ deeply into the
slots on each side, as shown.
Removing the Unit Removing the Hard Rubber Frame
(escutcheon)
1. Engage the catch pins on the removal tool
@
and
remove the two locks on the lower level.
Lower the frame and pull it forward as shown in
the figure.
Escutcheon (Accessory
0)
~~
~L
/-------- ------------..
~ ~
: Catch
J
1
\~
I
Lock
\j :
~--JL~
.J
2. When the lower level is removed, remove the
upper two locations.
• The frame can be removed from the top side in the same
manner.
~
~
4.
Pull the unit all the way out with your hands, being
careful not to drop it.
8
I
KVT-S14/KVT-S34DVD