Lamp Replacement - American DJ DJ Scan 250 User Instructions

The DJ Scan 250™ may be controlled by a wide range of controllers;
ie. Show Designer™, DMX Operator,™ Scene Setter™ or by the DJ
MINI/C basic controller.
MINI/C features:
American DJ Supply - www.americandj.com - DJ Scan 250™ Instruction Manual Page 9
© ®
DJ Scan 250™
Lamp Replacement: Caution! Never open the unit when in use.
Always disconnect the main power before attempting to replace the
lamp.
1. Be sure to follow the proper procedures when handling halogen
bulbs.
2. Lamp replacement has been made simple by incorporating the use
of a removable lamp tray and thumb screws.
3. Loosen the thumb screw on rear cover.
4. Remove the tray.
5. Remove and replace the bulb.
6. Reassemble.
Remember to always replace with the exact same type lamp and
fuse, unless otherwise specified by an authorized American DJ
service technician.
American DJ Supply - www.americandj.com - DJ Scan 250™ Instruction Manual Page 10
© ®

Lamp Replacement