Troubleshooting Tips; Before You Call For Service - GE JV535 Owner's Manual And Installation Instructions

Before you call for service...

Troubleshooting Tips

Save time and money! Review the following chart first
and you may not need to call for service.
Problem
Fan does not operate
when the switch is on
Fan fails to circulate air
or moves air more slowly
than normal
Fan continually cycles
off and on
Air coming from the
front vent (on some
models) when it is
ducted to the outside
16
Possible Causes
A fuse may be blown or a
circuit breaker may be tripped.
Excessively soiled filter.
The motor is probably
overheating and turning itself
off. This can be harmful to
the motor. Filter may be
excessively soiled.
Vent lever is in the
VERTICAL position (flat
against the plastic blower
housing) for recirculating.
What To Do
• Replace fuse or reset circuit breaker.
• Wash and replace the filters. See the Reusable
Metal Grease Filters section.
• Replace the filter if it is too soiled to clean. If it
is not soiled, or if replacing the filter does not
solve the problem, call for service.
• Replace the filter if it is soiled. If it is not soiled,
or if replacing the filter does not solve the problem,
call for service.
• Move the lever back to the HORIZONTAL position
(flat against the metal top of the hood) to vent
to the outside. See Step 10 in the Installation
Instructions for vent lever operation. This is normal
if the hood has been installed to recirculate.