Assembly and adjustments (continued)
Adjusting the dust blower (Fig. 9)
For best results, the dust blower tube (1, Fig. 9) should be
adjusted to direct air at both the blade and the work piece.
Sawdust collection port (Fig. 10 and 11)
This scroll saw allows a hose or vacuum accessory (not
provided) to be connected to the dust chute (1, Fig. 10). If
excessive sawdust buildup occurs inside the base, use a wet/dry
vacuum cleaner or manually remove sawdust by removing the
screws (2, Fig. 11) and metal plate on the left side of the saw.
Reattach the metal plate and screws before starting the saw. This
will keep your saw cutting efficiently.
13